CSC Classroom

Building: 
Community Studies
Number/Name: 
Classroom
Technology
Instructor's Computer: 
Dual
Layout
Setup Type: 
Seminar
Capacity: 
12
Tracking
Display: 
0
Classroom Picture: 
Additional Pictures: 

Welcome to Your Smart Classroom!
The Smart protocol for classroom technology is designed to make using computer, video, CD, and DVD playing as easy as possible. Please, do not hesitate to address questions about the Smart classrooms to Library & Information Services. We can be contacted via E-mail (helpdesk@dickinson.edu), telephone (x1000), or by visiting the Help Desk on the lower level of the Waidner-Spahr Library..

To Turn on the Video Projector:
Find the remote for the Sanyo projector (see image above). To turn the projector on, point the remote at the front of the projector and push the pink "On-Off" button. Do not adjust the sound volume on the projector remote; use the sound system control (see below). Use the "Input" button on the remote to select your projection source: computer or video. To turn the projector off, push the pink "On-Off" button on the remote. At the "Power off?" prompt, press the pink "On-Off" button again. The projector fan will continue to run until the unit is cooled down; it will shut down automatically.

To Turn on & View the Computer:
To use the computer, you will need to press the power button on back of the the computer if not on.  Press the "computer" button on the Sanyo remote to select "computer 1."

To Play & View a DVD, Videotape, or CD:
Find the remote for the JVC combination DVD/VCR unit. To turn the combination unit on, press the red "Power" button on the remote. With the data projector on, press the "video" button on the Sanyo remote. Insert your CD, DVD, or cassette into the appropriate drawer or slot and press the "Play" button on the JVC remote. If a TV channel is showing, you can eliminate it by pressing the "aux" button on the JVC remote. To switch between VCR and DVD, press the "DVD" or "VCR" buttons on the remote. To eject your disc or cassette, press the "Open/Close" button. This unit will play DVDs from all regions of the world. It will only play US (NTSC) VHS tapes however.

To View Campus Cable TV:
Find the remote for the JVC combination DVD/VCR unit. To turn the combination unit on, press the red "Power" button on the remote. With the data projector on, press the "video" button on the Sanyo remote. If TV channelsare not showing, press the "aux" button on the JVC remote repeatedly until you get a channel. Use the number keys or up&down buttons on the JVC remote to elect channel.

To Control the Sound Level:
You can control the sound for either the computer or the CD/DVD/VCR unit using the room's sound system. The sound system controller (see image above) is attached to the desktop. To turn the sound system on, turn the knob clockwise. You can adjust the sound level by turning the knob clockwise or counter-clockwise. Be aware. The volume controls on the computer interact with those of the sound system, so adjusting the volume on the computer will change the level of sound from the sound system as well. To turn the sound system off, turn the knob counter-clockwise until it clicks.

Please, log off the network and turn off all of the equipment before you leave the room.

Thank you,
The Staff of Library & Information Services