Weiss 221

Building: 
Weiss
Number/Name: 
221
Technology
Instructor's Computer: 
Mac
Layout
Setup Type: 
Lecture
Capacity: 
50
Tracking
Display: 
0
Classroom Picture: 

Welcome to Your Smart Classroom!
The Smart protocol for classroom technology is designed to make using computer, video, CD, and DVD playing as easy as possible. Please, do not hesitate to address questions about the Smart classrooms to Library & Information Services. We can be contacted via E-mail (helpdesk@dickinson.edu), telephone (x1000), or by visiting the Help Desk on the lower level of the Waidner-Spahr Library..

Basic instructions
The MediaLink controller on front of the podium can be used to turn the projector on and off, select input sources, control the DVD/VCR unit, and set volume You can also temporarily blank the image with the "pic mute" button and the sound with the "audio mute" button. Please note that in the event buttons are pressed with the projector off or the DVD/VCR mode is changed not using the MediaLink, the controller may "get out of sync" with the actual conditions. In most cases it is only necessary to press the appropriate button again on the MediaLink (even if it is already illuminated) to restore function.
Please be sure to press the "off" button on the mediaLink when done to conserve energy and lamp life. Do not leave it in picture mute when leaving.

To turn the projector On or OFF
Use the projector ON and OFF buttons on the MediaLink. The projector takes 30 seconds to warm up (The button will flash while the projector is warming up or cooling down. Please do not press other buttons during this time).

To view the podium iMac
If the computer image is not showing, press the power button on the back of the iMac. With the projector on, press the PC button on the MediaLink. If sound comes from the iMac itself rather than the room sound system when using Mac OS: go to "system prefernces" under the Apple menu and selct "sound". Under the "output" tab, select "ExtronScalerD". Note that the volume must be adjusted on the MediaLink.

To view a laptop
If your computer has a HDMI port: plug in the HDMI cable on top of the podium and press the "HDMI" button on the media controller. In most cases it should not be necessary to connect the "mini" sound cable, the sound should work via the HDMI connection.
Otherwise: connect the VGA cable located on top of the podium to the laptop VGA jack. If using sound, connect the "mini" sound plug provided to the laptop headphone jack. With the projector ON, press the LAPTOP button on the MediaLink.You may need to press a function key on your laptop to enable the external monitor function (may be marked "LCD/CRT" or with a monitor icon).

To Play & View a DVD, Videotape, or CD:
With the projector on, press the DVD or VCR button on the Media Link. Insert your CD, DVD, or video tape into the appropriate drawer or slot. Use the controls on the right side of the MediaLink (or the JVC remote) to control playback functions. If a cable TV channel is showing, press the TV/VCR button on the MediaLink to eliminate it.

To View Campus Cable TV: With the projector on, press the VCR button on the MediaLink. Then press the either the TV/VCR button on the MediaLink or the AUX button on the JVC remote (you may need to do this several times to get to TV mode). You can change channels by using the channel ("CH") up and down buttons or by using the keypad on the JVC remote to enter the channel number.

To control sound volume
Use the Volume control on the MediaLink.

System reset procedure
In the event the system does not appear to be functioning properly and help from LIS is not readily available, try the following. Shut down the computer (it is not necessary to shut down the projector). Once it has shut down, locate the plug connecting the power to the podium and unplug it. Wait at least 10 seconds and plug the power back in. then start the computer again and the problem should be cleared. Please let us know if you have needed to do this.

Instructions for A/V Equipment:

To Play a Phonograph Record:
Turn on the tuner and the record player. On the tuner, select "Phono" and set the volume. Place your record on the record player and begin playing it.

To Play an Audio Cassette:
Turn on the tuner and the cassette player. On the tuner, select "Tape 1" and set the volume. Place your cassette in the player and press "Play."

To Play a CD:
Turn on the tuner and the CD player. On the tuner, select "CD" and set the volume. On the CD player, press the open/close button, place your CD in the drawer, close the drawer, and press "Play."

To Listen to a Radio Broadcast:
Turn on the tuner and select "Tuner." Tune-in your radio station and set the volume.

Please, turn off all of the equipment before you leave the room.

Thank you,
The Staff of Library & Information Services